CPE WAN Management Protocol (TR-069)

CWMP Interoperability and Functionality Test Plan

TP-181 Issue 1 Amendment 2

HTML PDF Data Models TR-069

Cover Page | Executive Summary | 1 Purpose and Scope | 2 References and Terminology | 3 Test Plan Impact | 4 Test Setup | 5 Test Procedures | 6 Open Issues

Cover Page
1 Purpose and Scope

1.1 Purpose
1.2 Scope
1.3 Test Execution

2 References and Terminology

2.1 Conventions
2.2 References
2.3 Abbreviations

3 Test Plan Impact

3.1 Energy Efficiency
3.2 IPv6
3.3 Security

4 Test Setup

4.1 Test Equipment
4.2 Test Setup and Execution

4.2.1 Common Test Setup
4.2.2 Determine WAN Interface
4.2.3 Test Execution

4.3 CPE Test Requirements and Prerequisites
4.4 ACS Test Requirements
4.5 Interoperability Testing
4.6 Test Validation

5 Test Procedures

5.1 Basic Setup

5.1.1 Factory Reset
5.1.2 Time Setting (Device:2 Only)
5.1.3 Time Setting (InternetGatewayDevice:1 Only)
5.1.4 Firmware Download
5.1.5 GetRPCMethods
5.1.6 Configuration Backup and Restoration
5.1.7 PPP Interface Change
5.1.8 DHCP Provisioning
5.1.9 SPV on a Boolean Parameter
5.1.10 Encrypted Connection
5.1.11 GetParameterNames Vendor Specific Parameters
5.1.12 SetParameterValues Vendor Specific Parameters

5.2 Diagnostics

5.2.1 Diagnostics IPPing
5.2.2 Download Diagnostics over HTTP
5.2.3 Download Diagnostics over FTP
5.2.4 Upload Diagnostics over HTTP
5.2.5 Upload Diagnostics over FTP
5.2.6 TraceRoute
5.2.7 UDPEcho Test

5.3 Statistics and Monitoring

5.3.1 Current Interface Configuration (Device:2 Only)
5.3.2 Connected LAN Devices (InternetGatewayDevice:1 Only)
5.3.3 Connected LAN Devices – Wi-Fi (Device:2 Only)
5.3.4 Connected LAN Devices – DHCP (Device:2 Only)
5.3.5 Device Connect/Disconnect Notification Test

5.4 Port Mappings

5.4.1 Create a Port Mapping – Single Interface
5.4.2 Create a Port Mapping – All Interfaces (Device:2 only)
5.4.3 Create a Port Mapping – External Port Range
5.4.4 Create a Port Mapping – Lease Duration > 0
5.4.5 Create a Port Mapping – Remote Host Restriction
5.4.6 Create a Port Mapping – Multiple Entries – Precedence Rules
5.4.7 Modify a Port Mapping
5.4.8 Delete a Port Mapping
5.4.9 Create a Port Mapping – TCP

5.5 Advanced Firewall

5.5.1 Default Policy (Device:2 Only)
5.5.2 Deny/Allow Outbound Protocols (Device:2 Only)
5.5.3 Deny/Allow Outbound Ports (Device:2 Only)
5.5.4 Deny/Allow Source IP Address (Device:2 Only)

5.6 Wi-Fi Provisioning

5.6.1 Wi-Fi Setup WEP 64 (InternetGatewayDevice:1 Only)
5.6.2 Wi-Fi Setup WEP 128 (InternetGatewayDevice:1 Only)
5.6.3 Wi-Fi Setup WPA Personal (InternetGatewayDevice:1 Only)
5.6.4 Wi-Fi Setup WPA2 Personal (InternetGatewayDevice:1 Only)
5.6.5 Wi-Fi Setup WPA-WPA2 Personal (InternetGatewayDevice:1 Only)
5.6.6 Wi-Fi Setup WEP 64 (Device:2 Only)
5.6.7 Wi-Fi Setup WEP 128 (Device:2 Only)
5.6.8 Wi-Fi Setup WPA Personal (Device:2 Only)
5.6.9 Wi-Fi Setup WPA Enterprise (Device:2 Only)
5.6.10 Wi-Fi Setup WPA2 Personal (Device:2 only)
5.6.11 Wi-Fi Setup WPA2 Enterprise (Device:2 Only)
5.6.12 Wi-Fi Setup WPA-WPA2 Personal (Device:2 Only)
5.6.13 Wi-Fi Setup WPA-WPA2 Enterprise (Device:2 Only)
5.6.14 Wi-Fi Setup WPA3 Personal (Device:2 only)
5.6.15 Wi-Fi Setup WPA3-Personal-Transition (Device:2 only)
5.6.16 Wi-Fi Setup WPA3-Enterprise (Device:2 only)
5.6.17 Wi-Fi Setup – Add SSID (Device:2 Only)
5.6.18 Wi-Fi Setup – Remove SSID (Device:2 Only)

5.7 Localized Strings

5.7.1 Non-Printable ASCII Characters in SetParameterValues RPC (Device:2 Only)
5.7.2 Multi-Byte Encoding in SetParameterValues RPC (Device:2 Only)
5.7.3 Non-ASCII Characters in ParameterKey (Device:2 Only)
5.7.4 Multi-Byte Encoding in ParameterKey (Device:2 Only)
5.7.5 Non-ASCII Characters in CommandKey (Device:2 Only)
5.7.6 Multi-Byte Encoding in CommandKey (Device:2 Only)

5.8 Configuration Backup and Restore – Incorrect Backup File
5.9 DHCP Provisioning – Disable DHCP
5.10 Diagnostics IPPing – Error Condition
5.11 TraceRoute Diagnostics – Error Condition
5.12 IPPing Diagnostics – Periodic Inform
5.13 Deny/Allow Inbound IPv6 (Device:2 Only)
5.14 Download Diagnostics over HTTPS – TotalBytesReceived
5.15 Upload Diagnostics over HTTP - TotalBytesSent

6 Open Issues

6 Open Issues

Item #	Item Description	Reference(s)	Status
Item x

End of Broadband Forum Test Plan TP-181

Cover Page | Executive Summary | 1 Purpose and Scope | 2 References and Terminology | 3 Test Plan Impact | 4 Test Setup | 5 Test Procedures | 6 Open Issues

TP-181 is developed and maintained by The Broadband Forum. © The Broadband Forum 2022. All Rights Reserved. This page was generated by pandoc and GitHub Pages. View the specification source on GitHub.